banner-bg-copy
Rotary Electrical Connectors
Brushless Slip Ring


It is common to incorporate the rotating interfaces in the Robotics and Mechanical system. Therefore, data and electrical power is required to pass though these interfaces. A Brush-less slip-ring is a kind of slip-ring which contains fluid metal to transmit signals and electrical power.

For More Read…

Capsule Slip Ring


Capsule Slipring is a type of slipring which is used to transfer the data and electronic power between two contact surfaces where one surface is in static position and another is rotating.  Therefore, when a footprints and low cost is an important consideration for the transmission of electirc power…

For More Read…

Rotary Union
Rotary Joint


A Rotary Joint which is also refereed as rotary union is a union that takes into consideration revolution of the unified parts. It is along these lines a gadget that gives a seal between a stationary inventory section and a turning part to allow the progression of a liquid into…

For More Read…

Rotary Union
Hybrid Slip-Ring


An electric slip-ring which is combined with fiber optic, coaxial, high frequency and rotary unions is known as Hybrid slip-ring. Automation and technological machine are communicating via industrial network in modern environment…

For More Read…

Rotary Union
Pin Slip-Ring


Pin slip ring stands apart with its little measurements, simple association and advantage of installation. There are different channels which are accessible ranges from 2 to 8 which are widely used and preferred in the machines of packaging…

For More Read…

Rotary Union
Fiber Optic Rotary Joints


Fiber Optic Rotary Joints (FORJs) are to optical signs, a way to pass signals across turning interfaces, especially when transmitting a lot of information. FORJs keep up the inherent points of interest of fiber start to finish…

For More Read…

Miniature Slip Ring


Miniature slip rings are the smallest products of Capsule Slipring family. Outside diameters are between 6mm and 8mm. 2,4,6,8 and 12 channel models are available. Mini slip ring is specially designed for data and video signals transmission of small and medium-sized equipment…

For More Read…

Through-bore Slip Ring


It is a very popular type of slip ring. It is better than classical slip ring because in classical slip ring it can only be mounted at the end of shaft but through-bore slip ring can be put at the end as well as over the shaft…

For More Read…

Pancake Slip Ring


It is a very popular type of slip ring. It is better than classical slip ring because in classical slip ring it can only be mounted at the end of shaft but through-bore slip ring can be put at the end as well as over the shaft…

For More Read…

Select your currency
USD United States (US) dollar
EUR Euro